EKS dry vane pumps

Oil-free rotary vane pumps for vacuum and for blowing: 23 models from 17 to 264 m³/h (280 to 4,400 l/min). Choose the use, filter, and open any model to see its data. Values from the Ekko datasheet of each model, at 60 Hz.

EKS dry vane pump · Ekko datasheet

Vacuum use · end vacuum mmHg
Blow use · normal pressure kgf/cm²
Flow: Motor: kWDrive: Speed · weight:
Request a quote for this model

One pump, vacuum and blow

EKS pumps are ideal for vacuum and for blow operation. Each datasheet gives both curves: select with the one that matches your use.

Vacuum use
up to 740mmHg end vacuum

Standard equipment includes a vacuum gauge and regulator to hold the vacuum level constant. H models reach the highest vacuum of the series.

PrintingBook bindingPackingFormingAutomationAbsorption
See vacuum data
Blow use
up to 0.7kgf/cm² normal pressure

The same pump delivers oil-free air for blowing. A pressure gauge and regulator for blow operation are available as optional equipment.

See blow data

How a dry rotary vane pump works

The rotor sits eccentrically in the cylinder and carries vanes in machined slots. Centrifugal force pushes the vanes against the cylinder wall; air enters through the inlet filter, is compressed and leaves through the built-in silencer.

Self-lubricating carbon vanesNo oil in the pump: the discharged air is clean.
Air cooledSingle stage, no cooling water required.
Complete as standardBuilt-in particulate filter and silencer, vibration isolators, vacuum gauge and regulator, TEFC high efficiency motor.

Selecting the right model

Two values decide the selection: the air flow the process needs, and the vacuum level or blow pressure it has to reach. Standard models work at 450 mmHg normal vacuum; H models at 600 mmHg.

For more flow, twin models (A and B) combine two pump heads driven by one motor.

Frequently asked questions

What is a dry rotary vane pump?

A rotary vane pump that runs without oil. The rotor is eccentric in the cylinder and its carbon vanes slide out by centrifugal force; the carbon is self-lubricating, so the discharged air carries no oil.

Can the same EKS pump work on vacuum and on blowing?

Yes. EKS pumps are ideal for vacuum and blow operation. They come with a vacuum gauge and regulator; a pressure gauge and regulator for blow operation are optional.

What does the H in the model name mean?

In the Ekko datasheets, H models reach 740 mmHg end vacuum, work at 600 mmHg normal vacuum and 0.7 kgf/cm² normal pressure. Standard models reach 610 to 670 mmHg and work at 410 to 450 mmHg and 0.5 to 0.6 kgf/cm².

When is another technology a better choice?

For deeper vacuum, down to 0.1 mbar, EKL oil-sealed vane pumps fit better. For high flow at moderate vacuum or pressure, look at EKZ regenerative blowers.

Where can I buy EKS dry vane pumps in Colombia and Central America?

In Colombia, through Ingeniería SAE, the Ekko Pumps exclusive distributor. In Costa Rica, Nicaragua and El Salvador, through SAE Central, the Ekko Pumps exclusive distributor for those countries.

Where to buy EKS dry vane pumps

In Colombia, EKS dry vane pumps are sold by Ingeniería SAE. In Costa Rica, Nicaragua and El Salvador, by SAE Central. Both are Ekko Pumps exclusive distributors.

CO
Colombia

Ingeniería SAE

Exclusive distributor of Ekko Pumps in Colombia.

Bombas de vacío en Colombia
CA
Costa Rica · Nicaragua · El Salvador

SAE Central

Exclusive distributor of Ekko Pumps in Costa Rica, Nicaragua and El Salvador.

Bombas de vacío en Centroamérica

Need help sizing a dry vane pump?

Send us your flow and your vacuum or blow pressure, and our engineers will recommend the model.

Request a quote