EKC claw vacuum pumps
Dry claw vacuum pumps: 8 models from 72 to 1,140 m³/h, all reaching 28.4 inHg. Filter and open any model to see its data. Values at 60 Hz.
Values at 60 Hz. Maximum vacuum is the same for every model of the series: 28.4 inHg.
Dry claw technology
Two claw-shaped rotors turn without touching each other or the housing, so the compression chamber runs dry and the air leaves without oil.
Selecting the right model
Every EKC reaches the same maximum vacuum, so the flow your process needs decides the model. In larger sizes the EKC often works as the central unit of a vacuum network feeding several points at once; pipe and receiver tank sizing then decide how much of its capacity you use.
EKC pumps work where the air must leave without oil: food industry, pharmaceutical plants under GMP, clean rooms, thermoforming and pneumatic conveying. They are not designed for continuous liquid carry-over or large volumes of condensables.
Frequently asked questions
What is a claw vacuum pump?
A dry positive displacement pump: two claw-shaped rotors turn without contact with each other or with the housing, so the compression chamber needs no oil and the discharged air is oil-free.
What maintenance does an EKC need?
The compression chamber runs dry. The lubricant stays in the gearbox and bearings, so maintenance focuses on that oil and on the suction filter.
Where are EKC pumps used?
Where the air must leave without oil: food industry, pharmaceutical plants under GMP, clean rooms, thermoforming and pneumatic conveying, as a dedicated pump or as the central unit of a vacuum network.
What is the difference between EKC and EPC?
Both use claw technology. EKC pumps work on vacuum; EPC blowers work on pressure.
Where can I buy EKC claw vacuum pumps in Colombia and Central America?
In Colombia, through Ingeniería SAE, the Ekko Pumps exclusive distributor. In Costa Rica, Nicaragua and El Salvador, through SAE Central, the Ekko Pumps exclusive distributor for those countries.
Where to buy EKC claw vacuum pumps
In Colombia, EKC claw vacuum pumps are sold by Ingeniería SAE. In Costa Rica, Nicaragua and El Salvador, by SAE Central. Both are Ekko Pumps exclusive distributors.
Ingeniería SAE
Exclusive distributor of Ekko Pumps in Colombia.
Bombas de vacío de garras en ColombiaSAE Central
Exclusive distributor of Ekko Pumps in Costa Rica, Nicaragua and El Salvador.
Bombas de vacío de garras en CentroaméricaNeed help sizing a claw vacuum pump?
Send us your flow and vacuum level, and our engineers will recommend the model.




